I128_04 30 x 12 x 1.5 mm carbide insert drawing with 35-degree bevel

I128_04 I128_04 rectangular inserts beside red packaging

I128_04 30 x 12 x 1.5 mm Carbide Insert, 35-Degree Bevel

Name: I128_04 30 x 12 x 1.5 mm Carbide Insert, 35 Degree
SKU: I128_04
Price: 7.86 USD
Availability: InStock

$7.86

The listing gives I128_04 dimensions of 30 x 12 x 1.5 mm and a 35-degree bevel. It labels Taiwan as the origin.

SKU: I128_04 Category: Helical Cutterheads & Inserts

Description
Additional information

I128_04 is listed as a carbide insert measuring 30 x 12 x 1.5 mm with a 35-degree bevel. The drawing identifies the dimensions as length, width, thickness and slope, and labels Taiwan. It also shows two mounting holes. The drawing does not give their spacing or diameter, so check the insert against the target cutter body before you order.

Specifications

Product type	Carbide insert (product title)
Length x width x thickness	30 x 12 x 1.5 mm (source drawing)
Bevel	35 degrees (source drawing)
Origin label	Taiwan (title and drawing)
Mounting holes	Two shown; spacing and diameter are not stated

Check the cutter seat and hole pattern

Compare all three dimensions and the 35-degree bevel with the toolmaker drawing. The source image shows two holes, but it does not label their centers or diameters. Confirm the screw and seat details for the target cutter body. Do not use the insert title alone to identify a compatible head.

Before fitting the insert

Compare length, width and thickness with the cutter-body drawing.
Check that the required bevel is 35 degrees.
Ask for hole spacing, hole diameter and screw details if they are not on the tool drawing.
Confirm the insert sits flat in the seat before use.

Listing limits

The listing does not name a compatible cutter-body model, carbide grade, coating, screw size or operating limit. The image gives the insert dimensions and bevel, but not the mounting-hole measurements. Verify the seat and fastener details with the tool drawing.