I130_12 I130_12 insert drawing with R150 arc label

I130_12 I130_12 tooling and replaceable spiral insert assemblies

I130_12 15 x 15 x 2.5 mm R150 Carbide Insert

Name: I130_12 R150 Carbide Insert, 15 x 15 x 2.5 mm
SKU: I130_12
Price: 6.94 USD
Availability: InStock

$6.94

I130_12 is a 15 x 15 x 2.5 mm carbide insert with an R150 edge label.

SKU: I130_12 Category: Helical Cutterheads & Inserts

Description
Additional information

I130_12 is listed as a 15 x 15 x 2.5 mm carbide insert with an R150 edge label. The drawing labels length, width, thickness and arc, and shows Taiwan origin wording. It also shows a square face and a large center hole. The page does not define the R150 unit, hole size or target cutter body.

Specifications

Product type	Carbide insert (product title)
Length x width x thickness	15 x 15 x 2.5 mm (source drawing)
Arc label	R150; the unit is not stated
Origin label	Taiwan (title and drawing)
Mounting	Center hole shown; hole size is not stated

Match the R150 insert with the body drawing

Compare the 15 x 15 x 2.5 mm dimensions with the insert seat. The drawing labels the edge as R150 but does not state a unit. Confirm the required edge profile and center-hole dimensions with the tool drawing. Do not select it by the shared size alone.

Before selecting this profile

Compare the body dimensions with the target insert seat.
Ask which unit and profile the R150 label uses.
Check the center hole and fastener measurements.
Confirm the insert sits flat in the cutter body.

Listing limits

The listing does not name a compatible tool, screw size, hole diameter, carbide grade or coating. R150 is not defined in a written profile table. Verify the profile and mounting details before you order a replacement.