I128_05 12 x 12 x 2.2 mm I128_05 insert drawing with 35-degree bevel

I128_05 I128_05 square inserts with center holes

I128_05 12 x 12 x 2.2 mm Carbide Insert, 35-Degree Bevel

Name: I128_05 12 x 12 x 2.2 mm Carbide Insert, 35 Degree
SKU: I128_05
Price: 5.46 USD
Availability: InStock

$5.46

The I128_05 listing gives a 12 x 12 x 2.2 mm carbide insert with a 35-degree bevel.

SKU: I128_05 Category: Helical Cutterheads & Inserts

Description
Additional information

I128_05 is a square carbide insert listed at 12 x 12 x 2.2 mm with a 35-degree bevel. The drawing labels length, width, thickness and slope. It also shows a center hole and Taiwan origin wording. The source does not give the hole diameter or state which cutter body uses this insert. Check those details before you match it to a tool.

Specifications

Product type	Carbide insert (product title)
Length x width x thickness	12 x 12 x 2.2 mm (source drawing)
Bevel	35 degrees (source drawing)
Origin label	Taiwan (title and drawing)
Center hole	Visible in gallery; diameter is not stated

Match the square insert to its seat

Use the 12 x 12 x 2.2 mm dimensions and 35-degree bevel to compare this insert with a cutter-body drawing. The center hole is visible, but its diameter and screw type are absent. Confirm the seat and fastener before installation. The listing does not identify a compatible tool model.

Before replacing an insert

Check the 12 mm length and width and the 2.2 mm thickness.
Confirm that the required edge angle is 35 degrees.
Measure the center hole and seat from the tool drawing.
Verify the insert sits flush before returning the tool to use.

Listing limits

The page does not state the center-hole diameter, screw size, compatible cutter body, carbide grade or coating. The drawings support the outside dimensions and bevel only. Confirm mounting details with the toolmaker drawing if the insert must replace a specific part.