MCRT26 TCT 3-Flute Straight Bit, 1/2 Inch Shank, 6mm Dia x 20mm Cut

Name: MCRT26 TCT 3-Flute Straight Bit, 1/2 Inch Shank, 6mm Dia x 2
SKU: MCRT26
Price: 6.00 USD
Availability: InStock

$6.00

Cut accurate grooves, dados, slots and straight profiles in wood, MDF and plywood with this 1/2 in shank three-flute straight bit (6 mm diameter x 20 mm cut). Confirm cutter fit, cutting depth and router or machine capacity before use.

SKU: MCRT26 Category: Straight Router Bits

Description
Additional information

MCRT26 TCT 3-Flute Straight Bit, 1/2 Inch Shank, 6 mm Diameter x 20 mm Cut is for grooves, dados, slots, shallow pockets and straight sizing cuts in wood, MDF and plywood. Its 1/2 in shank must match the router collet or machine holder exactly.

Applications

Grooves and dados for cabinet and furniture construction
Slots, shallow pockets and straight trimming operations
Repeat work using a fence, guide, router table or CNC toolpath

Before Routing

Confirm the cutting diameter, cutting length and required depth for the project. Set the fence, guide or toolpath from test stock, and use multiple passes for deeper cuts. Make sure the machine and workholding are suitable for the cutter diameter and planned material removal.

Routing Tips

Keep the stock supported and the feed consistent. Clear chips to reduce heat buildup, especially in deeper slots or MDF. Use a test cut before routing visible panels, then adjust depth or feed based on edge quality and fit.

Compare related options in Straight Router Bits.