MCRT11 R8 router cutter drawing and panel groove example

MCRT11 turquoise R8 cutter with 12.7 mm shank

MCRT11 R8 Arc-Bending Router Bit, 12.7 mm Shank

Name: MCRT11 R8 Arc-Bending Router Bit, 12.7 mm Shank
SKU: MCRT11
Price: 21.85 USD
Availability: InStock

$21.85

MCRT11 is an R8 arc-bending router bit with a 1/2 inch (12.7 mm) shank. Check the holder and panel profile before routing.

SKU: MCRT11 Category: Straight Router Bits

Description
Additional information

MCRT11 is listed as an R8 arc-bending router bit for carbon crystal panels and similar decorative boards. The title and live type label specify a 1/2 inch (12.7 mm) shank. The gallery shows the cutter section and a curved groove example for panel bending.

Specifications

Product type	R8 arc-bending router bit
Shank in title and option	1/2 inch (12.7 mm)
Listed workpiece	Carbon crystal panels and similar decorative boards
Gallery	Cutter profile and curved panel groove
Selector	One non-variation type label

Check the R8 profile and holder

Confirm that an R8 groove matches the intended bend and panel thickness. Match the 12.7 mm shank to the collet or machine holder. The gallery shows a forming groove, but the page does not give a complete cutting-depth chart, so test the setup on an offcut first.

Before routing a panel

Check the R8 profile against the panel detail.
Match the 12.7 mm shank to the holder.
Support the panel and set a controlled groove depth.
Test the bend or profile on an offcut.
Stop if the surface chips or the cutter vibrates.

Listing limits

The page gives the R8 radius and shank, but it does not supply a complete profile dimension table or machine-specific cutting parameters. Confirm the required groove depth for the panel construction before routing finished pieces.