RCE13 R20 fillet cutterhead with 35 mm inner hole and 40 mm wood thickness
RCE13 blue four-tooth fillet cutterhead with center bore viewed from the side
RCE13 four radial cutting edges around the 35 mm cutterhead bore
RCE13 blue fillet cutterhead shown from two angles
RCE13 blue cutterhead with four curved profile knives and center bore
RCE13 R20 fillet cutterhead with 35 mm inner hole and 40 mm wood thickness
RCE13 blue four-tooth fillet cutterhead with center bore viewed from the side
RCE13 four radial cutting edges around the 35 mm cutterhead bore
RCE13 blue fillet cutterhead shown from two angles
RCE13 blue cutterhead with four curved profile knives and center bore

RCE13 R20 Fillet Cutterhead, 35 mm Bore, 40 mm Wood Thickness

$112.77

RCE13 is an R20 four-tooth fillet cutterhead. Its image lists a 35 mm inner hole and 40 mm wood thickness.

SKU: RCE13 Category:

RCE13 is a four-tooth fillet cutterhead with an R20 profile. The product option gives a 40 mm wood thickness. Its image labels a 35 mm inner hole and shows four radial cutting edges. The listing does not give a cutterhead diameter or a machine compatibility chart. Confirm the bore, clearance and target profile against the spindle documentation before use.

Specifications

Product typeFour-tooth fillet cutterhead
Profile radiusR20
Wood thickness40 mm (image label)
Inner hole35 mm (image label)
Cutting teethFour
Profile wordingImage says "1/4 radial tool"

Check the bore and profile before fitting

The product option calls this a 1/4 fillet cutter, while the image separately labels a 35 mm inner hole. The page does not specify a 1/4-inch shank. Match the bore to the spindle arbor and retention system. Then confirm the R profile and listed wood thickness on a test piece.

Before using the cutterhead

  1. Compare the R20 profile and 40 mm wood-thickness label with the workpiece.
  2. Check that the 35 mm bore matches the spindle arbor and retention hardware.
  3. Confirm cutterhead clearance and the allowed operating speed in the machine documentation.
  4. Make a test cut on scrap stock and inspect the profile before cutting finished material.

Listing limits

The page does not state the full cutterhead diameter, knife material, feed rate, operating speed or compatible spindle models. The image gives a 35 mm inner hole, but that alone does not confirm arbor or retainer fit. Verify the complete setup with the machine and cutterhead documentation.

Product gallery

RCE13 R20 fillet cutterhead with 35 mm inner hole and 40 mm wood thickness
Radius and bore labelsThe image labels R20, a 35 mm inner hole and 40 mm wood thickness.
RCE13 four radial cutting edges around the 35 mm cutterhead bore
Cutterhead viewed from aboveThis angle shows the center bore and four radial cutting edges.
RCE13 blue cutterhead with four curved profile knives and center bore
Cutterhead from two anglesThe gallery shows the same blue cutterhead from side and top views.

Related product: RCE12 R19 Fillet Cutterhead, 35 mm Bore, 38 mm Wood Thickness.

type

R20 (wood thickness 40mm)-End mill 1/4 fillet cutter

Related products

RCE26 R55 fillet cutterhead with 35 mm inner hole and 110 mm wood thicknessRCE26 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE26 R55 Fillet Cutterhead, 35 mm Bore, 110 mm Wood Thickness

$329.69
RCE6 R12.5 fillet cutterhead with 35 mm inner hole and 25 mm wood thicknessRCE6 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE6 R12.5 Fillet Cutterhead, 35 mm Bore, 25 mm Wood Thickness

$68.92
RCE18 R32.5 fillet cutterhead with 35 mm inner hole and 65 mm wood thicknessRCE18 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE18 R32.5 Fillet Cutterhead, 35 mm Bore, 65 mm Wood Thickness

$182.00
RCE10 R17.5 fillet cutterhead with 35 mm inner hole and 35 mm wood thicknessRCE10 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE10 R17.5 Fillet Cutterhead, 35 mm Bore, 35 mm Wood Thickness

$98.92
RCE16 R27.5 fillet cutterhead with 35 mm inner hole and 55 mm wood thicknessRCE16 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE16 R27.5 Fillet Cutterhead, 35 mm Bore, 55 mm Wood Thickness

$172.77
RCE8 R15 fillet cutterhead with 35 mm inner hole and 30 mm wood thicknessRCE8 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE8 R15 Fillet Cutterhead, 35 mm Bore, 30 mm Wood Thickness

$85.08
RCE5 R10 fillet cutterhead with 35 mm inner hole and 20 mm wood thicknessRCE5 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE5 R10 Fillet Cutterhead, 35 mm Bore, 20 mm Wood Thickness

$62.00
RCE27 R60 fillet cutterhead with 35 mm inner hole and 120 mm wood thicknessRCE27 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE27 R60 Fillet Cutterhead, 35 mm Bore, 120 mm Wood Thickness

$334.31