RCE27 R60 fillet cutterhead with 35 mm inner hole and 120 mm wood thickness
RCE27 blue four-tooth fillet cutterhead with center bore viewed from the side
RCE27 four radial cutting edges around the 35 mm cutterhead bore
RCE27 blue fillet cutterhead shown from two angles
RCE27 blue cutterhead with four curved profile knives and center bore
RCE27 R60 fillet cutterhead with 35 mm inner hole and 120 mm wood thickness
RCE27 blue four-tooth fillet cutterhead with center bore viewed from the side
RCE27 four radial cutting edges around the 35 mm cutterhead bore
RCE27 blue fillet cutterhead shown from two angles
RCE27 blue cutterhead with four curved profile knives and center bore

RCE27 R60 Fillet Cutterhead, 35 mm Bore, 120 mm Wood Thickness

$334.31

RCE27 is an R60 four-tooth fillet cutterhead. Its image lists a 35 mm inner hole and 120 mm wood thickness.

SKU: RCE27 Category:

RCE27 is a four-tooth fillet cutterhead with an R60 profile. The product option gives a 120 mm wood thickness. Its image labels a 35 mm inner hole and shows four radial cutting edges. The listing does not give a cutterhead diameter or a machine compatibility chart. Confirm the bore, clearance and target profile against the spindle documentation before use.

Specifications

Product typeFour-tooth fillet cutterhead
Profile radiusR60
Wood thickness120 mm (image label)
Inner hole35 mm (image label)
Cutting teethFour
Profile wordingImage says "1/4 radial tool"

Check the bore and profile before fitting

The product option calls this a 1/4 fillet cutter, while the image separately labels a 35 mm inner hole. The page does not specify a 1/4-inch shank. Match the bore to the spindle arbor and retention system. Then confirm the R profile and listed wood thickness on a test piece.

Before using the cutterhead

  1. Compare the R60 profile and 120 mm wood-thickness label with the workpiece.
  2. Check that the 35 mm bore matches the spindle arbor and retention hardware.
  3. Confirm cutterhead clearance and the allowed operating speed in the machine documentation.
  4. Make a test cut on scrap stock and inspect the profile before cutting finished material.

Listing limits

The page does not state the full cutterhead diameter, knife material, feed rate, operating speed or compatible spindle models. The image gives a 35 mm inner hole, but that alone does not confirm arbor or retainer fit. Verify the complete setup with the machine and cutterhead documentation.

Product gallery

RCE27 R60 fillet cutterhead with 35 mm inner hole and 120 mm wood thickness
Radius and bore labelsThe image labels R60, a 35 mm inner hole and 120 mm wood thickness.
RCE27 four radial cutting edges around the 35 mm cutterhead bore
Cutterhead viewed from aboveThis angle shows the center bore and four radial cutting edges.
RCE27 blue cutterhead with four curved profile knives and center bore
Cutterhead from two anglesThe gallery shows the same blue cutterhead from side and top views.

Related product: RCE26 R55 Fillet Cutterhead, 35 mm Bore, 110 mm Wood Thickness.

type

R60 (wood thickness 120mm)-End mill 1/4 fillet cutter

Related products

RCE4 R7.5 fillet cutterhead with 35 mm inner hole and 15 mm wood thicknessRCE4 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE4 R7.5 Fillet Cutterhead, 35 mm Bore, 15 mm Wood Thickness

$57.38
RCE5 R10 fillet cutterhead with 35 mm inner hole and 20 mm wood thicknessRCE5 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE5 R10 Fillet Cutterhead, 35 mm Bore, 20 mm Wood Thickness

$62.00
RCE21 R40 fillet cutterhead with 35 mm inner hole and 80 mm wood thicknessRCE21 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE21 R40 Fillet Cutterhead, 35 mm Bore, 80 mm Wood Thickness

$214.31
RCE16 R27.5 fillet cutterhead with 35 mm inner hole and 55 mm wood thicknessRCE16 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE16 R27.5 Fillet Cutterhead, 35 mm Bore, 55 mm Wood Thickness

$172.77
RCE14 R22.5 fillet cutterhead with 35 mm inner hole and 45 mm wood thicknessRCE14 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE14 R22.5 Fillet Cutterhead, 35 mm Bore, 45 mm Wood Thickness

$124.31
RCE11 R18 fillet cutterhead with 35 mm inner hole and 36 mm wood thicknessRCE11 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE11 R18 Fillet Cutterhead, 35 mm Bore, 36 mm Wood Thickness

$112.77
RCE23 R45 fillet cutterhead with 35 mm inner hole and 90 mm wood thicknessRCE23 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE23 R45 Fillet Cutterhead, 35 mm Bore, 90 mm Wood Thickness

$246.62
RCE17 R30 fillet cutterhead with 35 mm inner hole and 60 mm wood thicknessRCE17 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE17 R30 Fillet Cutterhead, 35 mm Bore, 60 mm Wood Thickness

$177.38