RCE18 R32.5 fillet cutterhead with 35 mm inner hole and 65 mm wood thickness

RCE18 blue four-tooth fillet cutterhead with center bore viewed from the side

RCE18 R32.5 Fillet Cutterhead, 35 mm Bore, 65 mm Wood Thickness

Name: RCE18 R32.5 Fillet Cutterhead, 35 mm Bore - BitsRouter
SKU: RCE18
Price: 182.00 USD
Availability: InStock

$182.00

RCE18 is an R32.5 four-tooth fillet cutterhead. Its image lists a 35 mm inner hole and 65 mm wood thickness.

SKU: RCE18 Category: Roundover Router Bits, 1/4 in Radius

Description
Additional information

RCE18 is a four-tooth fillet cutterhead with an R32.5 profile. The product option gives a 65 mm wood thickness. Its image labels a 35 mm inner hole and shows four radial cutting edges. The listing does not give a cutterhead diameter or a machine compatibility chart. Confirm the bore, clearance and target profile against the spindle documentation before use.

Specifications

Product type	Four-tooth fillet cutterhead
Profile radius	R32.5
Wood thickness	65 mm (image label)
Inner hole	35 mm (image label)
Cutting teeth	Four
Profile wording	Image says "1/4 radial tool"

Check the bore and profile before fitting

The product option calls this a 1/4 fillet cutter, while the image separately labels a 35 mm inner hole. The page does not specify a 1/4-inch shank. Match the bore to the spindle arbor and retention system. Then confirm the R profile and listed wood thickness on a test piece.

Before using the cutterhead

Compare the R32.5 profile and 65 mm wood-thickness label with the workpiece.
Check that the 35 mm bore matches the spindle arbor and retention hardware.
Confirm cutterhead clearance and the allowed operating speed in the machine documentation.
Make a test cut on scrap stock and inspect the profile before cutting finished material.

Listing limits

The page does not state the full cutterhead diameter, knife material, feed rate, operating speed or compatible spindle models. The image gives a 35 mm inner hole, but that alone does not confirm arbor or retainer fit. Verify the complete setup with the machine and cutterhead documentation.