RCE25 R50 fillet cutterhead with 35 mm inner hole and 100 mm wood thickness
RCE25 blue four-tooth fillet cutterhead with center bore viewed from the side
RCE25 four radial cutting edges around the 35 mm cutterhead bore
RCE25 blue fillet cutterhead shown from two angles
RCE25 blue cutterhead with four curved profile knives and center bore
RCE25 R50 fillet cutterhead with 35 mm inner hole and 100 mm wood thickness
RCE25 blue four-tooth fillet cutterhead with center bore viewed from the side
RCE25 four radial cutting edges around the 35 mm cutterhead bore
RCE25 blue fillet cutterhead shown from two angles
RCE25 blue cutterhead with four curved profile knives and center bore

RCE25 R50 Fillet Cutterhead, 35 mm Bore, 100 mm Wood Thickness

$260.46

RCE25 is an R50 four-tooth fillet cutterhead. Its image lists a 35 mm inner hole and 100 mm wood thickness.

SKU: RCE25 Category:

RCE25 is a four-tooth fillet cutterhead with an R50 profile. The product option gives a 100 mm wood thickness. Its image labels a 35 mm inner hole and shows four radial cutting edges. The listing does not give a cutterhead diameter or a machine compatibility chart. Confirm the bore, clearance and target profile against the spindle documentation before use.

Specifications

Product typeFour-tooth fillet cutterhead
Profile radiusR50
Wood thickness100 mm (image label)
Inner hole35 mm (image label)
Cutting teethFour
Profile wordingImage says "1/4 radial tool"

Check the bore and profile before fitting

The product option calls this a 1/4 fillet cutter, while the image separately labels a 35 mm inner hole. The page does not specify a 1/4-inch shank. Match the bore to the spindle arbor and retention system. Then confirm the R profile and listed wood thickness on a test piece.

Before using the cutterhead

  1. Compare the R50 profile and 100 mm wood-thickness label with the workpiece.
  2. Check that the 35 mm bore matches the spindle arbor and retention hardware.
  3. Confirm cutterhead clearance and the allowed operating speed in the machine documentation.
  4. Make a test cut on scrap stock and inspect the profile before cutting finished material.

Listing limits

The page does not state the full cutterhead diameter, knife material, feed rate, operating speed or compatible spindle models. The image gives a 35 mm inner hole, but that alone does not confirm arbor or retainer fit. Verify the complete setup with the machine and cutterhead documentation.

Product gallery

RCE25 R50 fillet cutterhead with 35 mm inner hole and 100 mm wood thickness
Radius and bore labelsThe image labels R50, a 35 mm inner hole and 100 mm wood thickness.
RCE25 four radial cutting edges around the 35 mm cutterhead bore
Cutterhead viewed from aboveThis angle shows the center bore and four radial cutting edges.
RCE25 blue cutterhead with four curved profile knives and center bore
Cutterhead from two anglesThe gallery shows the same blue cutterhead from side and top views.

Related product: RCE26 R55 Fillet Cutterhead, 35 mm Bore, 110 mm Wood Thickness.

type

R50 (wood thickness 100mm)-End mill 1/4 fillet cutter

Related products

RCE5 R10 fillet cutterhead with 35 mm inner hole and 20 mm wood thicknessRCE5 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE5 R10 Fillet Cutterhead, 35 mm Bore, 20 mm Wood Thickness

$62.00
RCE24 R47.5 fillet cutterhead with 35 mm inner hole and 95 mm wood thicknessRCE24 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE24 R47.5 Fillet Cutterhead, 35 mm Bore, 95 mm Wood Thickness

$255.85
RCE14 R22.5 fillet cutterhead with 35 mm inner hole and 45 mm wood thicknessRCE14 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE14 R22.5 Fillet Cutterhead, 35 mm Bore, 45 mm Wood Thickness

$124.31
RCE23 R45 fillet cutterhead with 35 mm inner hole and 90 mm wood thicknessRCE23 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE23 R45 Fillet Cutterhead, 35 mm Bore, 90 mm Wood Thickness

$246.62
RCE18 R32.5 fillet cutterhead with 35 mm inner hole and 65 mm wood thicknessRCE18 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE18 R32.5 Fillet Cutterhead, 35 mm Bore, 65 mm Wood Thickness

$182.00
RCE4 R7.5 fillet cutterhead with 35 mm inner hole and 15 mm wood thicknessRCE4 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE4 R7.5 Fillet Cutterhead, 35 mm Bore, 15 mm Wood Thickness

$57.38
RCE7 R14 fillet cutterhead with 35 mm inner hole and 28 mm wood thicknessRCE7 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE7 R14 Fillet Cutterhead, 35 mm Bore, 28 mm Wood Thickness

$82.77
RCE17 R30 fillet cutterhead with 35 mm inner hole and 60 mm wood thicknessRCE17 blue four-tooth fillet cutterhead with center bore viewed from the side
Quick View

Roundover Router Bits, 1/4 in Radius

RCE17 R30 Fillet Cutterhead, 35 mm Bore, 60 mm Wood Thickness

$177.38