I140_02 CNC 3-Flute Roughing End Mill, 8x55x100mm, Uncoated

I140_02 CNC 3-Flute Roughing End Mill, 8x55x100mm, Uncoated is designed for roughing, slotting, drilling, straight cutting and material removal on CNC woodworking machines or panel-processing equipment. It is suitable for woodworking shops, cabinet production, furniture projects and repeat routing tasks where a clean profile and stable setup are important.

I140_02 CNC 3-Flute Roughing End Mill, 8x55x100mm, Uncoated Applications

Use this CNC end mill when the project needs a controlled cut rather than a rough material-removal pass. It can support cabinet doors, drawer fronts, panels, trim pieces, furniture components, jigs or decorative woodworking details depending on the profile and setup.

How to Choose the Right Setup

• Confirm diameter, flute count, cutting length, overall length, coating, shank fit, rotation direction, spindle setup and material compatibility.
• Match the shank, cutting length and overall length to the CNC spindle, collet and programmed toolpath.
• Check the work material, including hardwood, softwood, MDF, plywood, laminated panels and suitable plastics.
• Run a conservative test toolpath to confirm chip evacuation, cut quality and spindle load before production cutting.

Use and Maintenance Tips

Use suitable RPM, feed rate and step-down for the cutter diameter. Clear chips well, watch heat buildup and replace worn cutters before edge quality drops.

Related category: CNC end mill selection.

Helpful guides: router bit types and uses, router bit speed chart, and woodworking router bits guide.