I140_13 CNC TCT Straight Bit, 1/2 Inch Shank, 3x12mm
$6.25
Use I140_13 CNC TCT Straight Bit, 1/2 Inch Shank, 3x12mm for controlled CNC routing, profiling, slotting, roughing or drilling operations as specified by the tool geometry. Confirm the holder, machine capability, work material, toolpath and cutting parameters before machining finished parts.
I140_13 CNC TCT Straight Bit, 1/2 Inch Shank, 3x12mm is CNC tooling for controlled panel and solid-wood machining. Its exact geometry determines whether it is best suited to roughing, straight cutting, drilling, slotting or profiling, so the cutter should be matched to the operation shown in its product specification.
Applications
- CNC cabinet, furniture and panel-production workflows
- Controlled material removal using the correct programmed toolpath
- Repeat work where secure workholding and consistent cutting parameters are essential
Before Machining
Confirm the shank or holder interface, cutting dimensions, tool length, spindle capacity and material compatibility. Set the correct toolpath depth, feed rate and spindle speed for the cutter and material. Use a trial path or offcut before machining a visible or production part.
Machining Tips
Keep workholding rigid, clear chips effectively and use conservative starting parameters. Monitor chip quality, edge finish and machine sound during the first run, then adjust the program rather than forcing the tool through the material.
Compare related options in CNC Router Bits & End Mills.
| type | CNC TCT Straight Cutter 1/2 X3X12 |
|---|
Related products
CNC Router Bits & End Mills
I140_05 CNC 3-Flute Roughing End Mill, 10x50x100mm, Uncoated
CNC Router Bits & End Mills
I140_06 CNC 3-Flute Roughing End Mill, 12x50x100mm, Uncoated
CNC Router Bits & End Mills
CNC Router Bits & End Mills
CNC Router Bits & End Mills
CNC Router Bits & End Mills
CNC Router Bits & End Mills
CNC Router Bits & End Mills
I140_04 CNC 3-Flute Roughing End Mill, 10x55x100mm, Uncoated