TX4899 – Thin Flat Bottom Router Bit for Woodworking (6mm Shank)
$8.73
TX4899 thin flat bottom router bit with 6mm shank, designed for woodworking routers. Ideal for bottom cleaning, shallow cuts, and flat-surface detailing with high precision. Provides smooth finishes on wood panels, MDF, and plywood in trimming and engraving applications.
Bottom-Cleaning Router Bit — Flat, Tear-Free Surfacing
Ideal for pocket bottom cleaning, spoilboard surfacing and flattening jigs. Factory-sealed bearing and heat-resistant Teflon® coating reduce friction and pitch build-up.
Features
- Heat-resistant Teflon® coating minimizes resin build-up.
- Sealed, pre-lubricated bearing for smooth tracking.
- Industrial-grade body; manufacturing tolerance ±0.003″.
- Leaves flat, clean bottoms for pockets, dados and surfaces.
Specifications
- Name: Bottom-Cleaning Router Bit
- Item: 6 mm Shank
- Material: 45# steel body
- Tolerance: ±0.003″
- Bearing: Sealed & pre-lubricated
- Recommended Parameters: Feed 8–12 m/min; Spindle 18,000–24,000 RPM
- Compatible Materials: Solid wood, engineered wood, MDF, plywood, etc.
- Applicable Equipment: Trim/handheld router, router table, CNC/engraver, trimmer.
Package Includes
- Bottom-cleaning router bit × 1
- Pre-installed guide bearing
Notes
- Color Preference & Substitutions — Your selected color will be prioritized. If out of stock, a similar alternative color may be provided. Please confirm this note at checkout.
- Measurement Tolerance — Manual measurements may vary by 1–3 mm.
- Color Disclaimer — Due to display and photography differences, actual color may vary slightly.
Reference
Common Machine Speeds
| Machine | Typical Speed Range (RPM) | Notes |
|---|---|---|
| Trim Router | 10,000–30,000 | Handheld trimming & edge work |
| Handheld Router | 9,000 / 12,000 / 15,000 / 19,000 / 23,000 | Selector-dial speeds |
| Router Table | 12,000–24,000 | Depends on bit diameter & cut |
| CNC / Engraver | Up to ~18,000 | Program-controlled |
Diameter vs. Max Speed / Feed
| Bit Diameter / Cutting Height (mm) | Max Speed (RPM) | Max Feed (mm/min) |
|---|---|---|
| ≤ 25.0 | 24,000 | 5,000 |
| 25.1 – 35.0 | 18,000 | 4,000 |
| 35.1 – 50.0 | 16,000 | 3,500 |
| 50.1 – 60.0 | 14,000 | 3,000 |
| 60.1 – 80.0 | 12,000 | 2,500 |
| > 80.0 | 10,000 | 2,000 |
Use these charts as guidance; adjust per material, bit sharpness, and machine condition.
| shank | 6mm shank |
|---|
Related products
6mm Shank Router Bits
RTS60230 – 1-3/4″ Bowl & Tray Router Bit (1/4″, 6mm & 8mm Shank, Carbide Tipped)
6mm Shank Router Bits
6mm Shank Router Bits
6mm Shank Router Bits
TX6966 – Ball Nose Router Bit (6mm Shank, Single or Set Options)
6.35mm （¼-Inch） Shank Router Bits
RTE753 – 4-Flute Roundover Router Bit | 1/4″, 6mm, 8mm Shank Options
12mm Shank Router Bits
RTE3838 – 45° Mortise and Tenon Router Bit (1/4″, 6mm, 8mm, 1/2″, 12mm Shank)
6mm Shank Router Bits
6mm Shank Router Bits
TX7044 – Flush Trim Router Bit (6mm Shank, Multiple Sizes and Sets)
