RTE1867 – ER16 Collet Chuck & Collet Set (1/4″, 1/2″, 6mm, 8mm, 10mm, 12mm Shank)
Price range: $4.15 through $10.92
The RTE1867 ER16 Collet Chuck and Collet Set provides secure tool holding for CNC routers and milling machines. Includes multiple shank sizes from 1/4″ to 12mm for versatile woodworking and machining.
ER16 Collet Chuck and Collet Set – CNC Router Tool Holder, Multiple Shank Sizes
45# steel construction with heat-resistant Teflon coating and sealed bearing. ±0.003″ tolerance for precise cuts on solid wood, MDF, plywood, and engineered boards.
Specifications
- Material: 45# steel
- Features: High-temperature & heat-resistant Teflon coating
- Tolerance: ±0.003″
- Bearing: Sealed & lubricated
- Shank Diameter: 8 mm
- Applicable Materials: Solid wood, ecological board, MDF, plywood, etc.
- Applicable Equipment: Electric router, trim router, engraving/CNC, hanging machine, etc.
- Recommended Parameters: Feed 8–12 m/min; Spindle 18,000–24,000 RPM
Package Included
- 1 × router bit
Notes
- Your selected color will be prioritized for shipment; if out of stock, an alternative color may be sent.
- Due to manual measurement, a small deviation of 1–3 mm may occur.
- Display/photography differences may cause slight color variation from the actual product.
- Extension rods and simple clips are sold separately and must be paired; this product is not a complete set.
Reference
| Common Machine | Typical Speed Range | Notes |
|---|---|---|
| Trim router | 10,000–30,000 RPM | — |
| Electric router | 9,000 / 12,000 / 15,000 / 19,000 / 23,000 RPM | Typical multi-gear settings (1st–5th) |
| Vertical router (table) | 12,000 (low) – 24,000 (high) RPM | Low/High ranges |
| Automatic engraving/CNC | Up to ~18,000 RPM (VFD) | Variable-frequency drive |
| Diameter or Cutting Height (mm) | Max Speed (RPM) | Max Feed (mm/min) |
|---|---|---|
| ≤ 25 | 24,000 | 5,000 |
| 25.1–35 | 18,000 | 4,000 |
| 35.1–50 | 16,000 | 3,500 |
| 50.1–60 | 14,000 | 3,000 |
| 60.1–80 | 12,000 | 2,500 |
| > 80 | 10,000 | 2,000 |
| type | 1/4" shank – ER16 chuck holder (no collet), 8mm shank – ER16 chuck holder (no collet), 1/2" shank – ER16 chuck holder (no collet), 12mm shank – ER16 chuck holder (no collet), 6mm shank – ER16 chuck holder (no collet), 10mm shank – ER16 chuck holder (no collet), 1/4" – ER16 collet, 8mm – ER16 collet, 1/8" – ER16 collet, 6mm – ER16 collet, 10mm – ER16 collet |
|---|
Related products
12.7mm （½-Inch ）Shank Router Bits
S4028 – 1-3/4 Inch Bowl & Tray Router Bit for Woodworking – Available in 12mm and 1/2” Shank
12.7mm （½-Inch ）Shank Router Bits
12.7mm （½-Inch ）Shank Router Bits
RTL0763 – Carbide Flush Trim Router Bit Set with Bearing (12mm & 1/2″ Shank, Multiple Sizes)
12.7mm （½-Inch ）Shank Router Bits
TL090 – Top & Bottom Bearing Flush Trim Router Bit (12mm & 1/2″ Shank, Carbide Woodworking Cutter)
12.7mm （½-Inch ）Shank Router Bits
TR130 – Carbide Insert Router Bit with Replaceable Knives (8mm, 12mm & 1/2″ Shank)
12.7mm （½-Inch ）Shank Router Bits
FI508 – Round Over Router Bit Set, 6-Piece (12mm & 1/2” Shank Options)
12.7mm （½-Inch ）Shank Router Bits
RTL043 – Adjustable Finger Joint Router Bit (Wood Joinery Cutter, 8mm, 12mm & 1/2″ Shank)
12.7mm （½-Inch ）Shank Router Bits
L0248 – Door & Window Casing Router Bit for Woodworking – Available in 12mm and 1/2” Shank
