I172_18 I172_18 25 mm four-tooth tenon cutter dimension image

I172_18 25 mm Four-Tooth Tenon Cutter, 6.4 mm Tenon, 1/2-Inch Shank

Name: I172_18 25 mm Tenon Cutter, 6.4 mm, 1/2-Inch
SKU: I172_18
Price: 80.46 USD
Availability: InStock

$80.46

I172_18 is a four-tooth tenon cutter with a 25 mm diameter, 6.4 mm tenon and 1/2-inch shank.

SKU: I172_18 Category: Corner Round Router Bits

Description
Additional information

I172_18 is a four-tooth tenon cutter. The source image labels a 25 mm cutter diameter and 6.4 mm tenon depth. It also lists 25 mm applicable wood thickness and a 1/2-inch handle. Use these labels to plan a test joint. Confirm the router and workpiece setup before cutting finished stock.

Specifications

Product type	Four-tooth tenon cutter
Cutter diameter	25 mm (source image)
Tenon depth	6.4 mm (source image)
Applicable wood thickness	25 mm (source image)
Teeth	Four (source image)
Shank	1/2 inch handle (source image)
Material and profile	Use the source image and delivered tool to confirm details not stated in the listing

Match the tenon to the mating joint

The image lists a 25 mm cutter and 6.4 mm tenon depth. Measure the mating mortise or shoulder and account for the cutter geometry. Check the 1/2-inch shank against the router collet. Test the joint on matching scrap before routing the finished part.

Before cutting a tenon

Measure the mating mortise or opening before choosing the bit.
Compare the 25 mm cutter and 6.4 mm tenon labels with the joint drawing.
Check the 1/2-inch shank against the router collet and machine clearance.
Secure the workpiece and use a shallow test pass to check the shoulder and fit.
Inspect the test joint before repeating the cut on finished stock.

Listing limits

The listing omits feed rate, maximum RPM, overall length, cutter material and compatible router models. The source image gives the cutter and tenon dimensions but not all tool measurements. Measure the delivered bit and follow the machine maker instructions for speed, feed and depth.