Name: DGC3 5mm Diamond Slotting Cutter | BitsRouter
SKU: DGC3
Price: 99.00 USD
Availability: InStock

DGC3 125mm Diamond Slotting Cutter, 5mm Width, 35mm Bore, 6T

$99.00

DGC3 diamond slotting cutter with a 125 mm outside diameter, 5 mm cutting width, 35 mm bore and 6 teeth. Confirm arbor fit, machine clearance and required groove width before ordering.

The DGC3 diamond slotting cutter has a listed 125 mm outside diameter, 5 mm cutting width, 35 mm bore and six teeth. Use the required finished groove width and the machine arbor arrangement to identify the correct model.

Listed specifications

Specification	DGC3 listing
Tool type	Diamond slotting cutter
Outside diameter	125 mm
Cutting width	5 mm
Bore	35 mm
Tooth count	6 teeth

Choose this model

Choose DGC3 when the drawing calls for a 5 mm groove and the machine accepts the listed 125 mm diameter and 35 mm bore. Confirm the actual fit with the arbor, spacers, flange and guard. The series models differ by cutting width, so do not select by outside diameter alone.

Compare DGC1 through DGC5

Model	Outside diameter	Cutting width	Bore	Teeth
DGC1	125 mm	3 mm	35 mm	6
DGC2	125 mm	4 mm	35 mm	6
DGC3	125 mm	5 mm	35 mm	6
DGC4	125 mm	6 mm	35 mm	6
DGC5	125 mm	8 mm	35 mm	6

DGC1 is included for comparison and remains the 3 mm option. DGC2 through DGC5 cover the listed 4, 5, 6 and 8 mm widths.

Setup and test cut

Verify the bore, arbor support, rotation direction, flange contact and machine clearance before installation.
Confirm that the selected width matches the groove, spline or component in the project drawing.
Use the speed, feed, guarding and cutting-depth limits from the machine and cutter suppliers.
Make a test cut in matching scrap and check groove width, depth, edge condition, heat and vibration before production.

Before you order

Compare all listed widths in the diamond groove cutter category. For a compatibility check, email sales@bitsrouter.com with the machine, arbor details, required groove dimensions, material and quantity.