I140_10 CNC 3-Flute Roughing End Mill, 18x55x165mm, Uncoated

I140_10 CNC 3-Flute Roughing End Mill, 18x55x165mm, Uncoated is designed for shaping cabinet doors, panel profiles, furniture details, decorative edges and repeat woodworking profiles. It is suitable for woodworking shops, cabinet production, furniture projects and repeat routing tasks where a clean profile and stable setup are important.

I140_10 CNC 3-Flute Roughing End Mill, 18x55x165mm, Uncoated Applications

Use this raised panel router bit when the project needs a controlled cut rather than a rough material-removal pass. It can support cabinet doors, drawer fronts, panels, trim pieces, furniture components, jigs or decorative woodworking details depending on the profile and setup.

How to Choose the Right Setup

• Confirm profile shape, cutting diameter, shank size, router table setup, material and safe RPM for the bit diameter.
• Match the shank exactly to the router collet or spindle holder.
• Check the work material, including hardwood, softwood, MDF, plywood or laminated panels.
• Use a test cut to confirm profile depth, fit and surface finish before routing finished stock.

Use and Maintenance Tips

For a cleaner edge, use steady feed pressure, remove material in multiple passes when the profile is large, and clear chips before heat builds up. Keep the cutting edge clean and inspect the bit before repeat work. A dull or dirty cutter can cause burning, chatter and rough surfaces even when the router setup is correct.

Related category: raised panel router bit selection.

Helpful guides: router bit types and uses, router bit speed chart, and woodworking router bits guide.