(DB01020)1pc 110mm or 160mm Concrete SDS Plus Drill Bit Cross Tips Drilling Bits

Specification:

• Material: 40Cr and original YG8C
• Shank: SDS PLUS
• Flute: double flutes S4
• Tip: Cross Tips / 4 Cutters
• Drill body hardness: HRC45?to HRC48
• Carbide Hardness: HRC89.5-90.5
• Diameter: 6/8/10/12/14mm
• Length: 110mm/160mm

Usage:

• Installed with the round handle interface hammer on concrete, stone, brick body carries out slotting operation, for building, installation of water and electricity, home decoration, modern DIY necessary tools.

Packing Included:

• 1pc Drill Bit

Note:

• We have been producing drill bits, hole saws and chisels for more than 26 years till now. As to drill bits, we only adopt original carbide tip YG8C, not recycle one. And it is much strong. Besides, 40CR is much better than normal material 45# steel. For example, 6X160mm, we can drill more than 150 holes.
• Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you
• ?
•