MCRB6 Hinge Mortising Router Bit, 1/2 Inch Shank, 25mm Dia
$12.00
Route accurate 25 mm hinge recesses in cabinet doors and furniture parts. This 1/2 in shank hinge mortising cutter should be matched to the hinge hardware, template and machine before cutting finished work.
MCRB6 Hinge Mortising Router Bit, 1/2 Inch Shank, 25mm Dia is intended for routing controlled hinge mortises in cabinet doors and furniture components. The 25 mm cutting diameter helps match the cutter to the hinge hardware or template being used.
Applications
- Hinge recesses in cabinet doors and face-frame components
- Template-guided mortising for repeat furniture parts
- Accurate hardware fitting before final assembly
Choose the Correct Setup
Confirm that the 25 mm diameter matches the hinge requirement, then check the 1/2 in shank against the router collet or machine holder. Use a suitable template or guide to position the mortise and test the depth with the actual hinge before routing a finished door.
Routing Tips
Clamp the work securely and make shallow, controlled passes. Clear chips between passes and check the hinge fit frequently so the hardware seats cleanly without an oversized recess.
Compare related options in Hinge Mortising Router Bits.
| type | Three-dimensional hinge knife 1/2 * 25 * 100 |
|---|
Related products
Straight Router Bits
MCRB2 Grid Plate Connectors, 200 Sets with Fasteners and Screws
Straight Router Bits
Straight Router Bits
MCRT10 – R8 Arc Bending Router Bit – 1/4 inch (6.35mm) Shank, Alloy Model
Straight Router Bits
MCRT13 – R30 Arc Bending Router Bit – 1/2 inch (12.7mm) Shank, Alloy Model
Straight Router Bits
MCRT26 TCT 3-Flute Straight Bit, 1/2 Inch Shank, 6mm Dia x 20mm Cut
Straight Router Bits
MCRT12 – R18 Arc Bending Router Bit – 1/2 inch (12.7mm) Shank, Alloy Model
Straight Router Bits
MCRT28 – TCT 3-Flute Straight Bit – 1/2 inch Shank × 8mm Dia × 20mm Cut
Straight Router Bits
MCRB1 Grid Plate Connectors, 100 Sets with Fasteners and Screws