(DB01010)3pc/6 to 10mm and set 210mm Lot Drill Bits

Specification:

• Material: 40Cr and original YG8C
• Shank: SDS PLUS
• Flute: single flute S2 /?double flutes S4
• Tip: Flat tip 2 Cutter / Cross tip 4 cutters
• Drill body hardness: HRC45?to HRC48
• Carbide Hardness: HRC89.5-90.5
• Diameter: 6/8/10 mm
• Length: 210mm

 

Usage:

• Installed with the round handle interface hammer on concrete, stone, brick body carries out slotting operation, for building, installation of water and electricity, home decoration, modern DIY necessary tools.

 

Packing Included

• 1 x 6X210MM
• 1 x 8X210MM
• 1 x 10X210M

 

Note:

• We have been producing drill bits, hole saws and chisels for more than 22 years till now. As to drill bits, we only adopt original carbide tip YG8C, not recycle one. And it is much strong. Besides, 40CR is much better than normal material 45# steel. For example, 6X160mm, we can drill more than 150 holes.
• Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
•