I120_41 – V-Groove Cutter – 1/2” Shank × 40mm Diameter × 4T – 4-Tooth Design

I120_41 – V-Groove Cutter – 1/2” Shank × 40mm Diameter × 4T – 4-Tooth Design is designed for cutting V-grooves, signmaking lines, decorative channels and profile details in wood, MDF and plywood. It is suitable for woodworking shops, cabinet production, furniture projects and repeat routing tasks where a clean profile and stable setup are important.

I120_41 – V-Groove Cutter – 1/2” Shank × 40mm Diameter × 4T – 4-Tooth Design Applications

Use this V-groove router bit when the project needs a controlled cut rather than a rough material-removal pass. It can support cabinet doors, drawer fronts, panels, trim pieces, furniture components, jigs or decorative woodworking details depending on the profile and setup.

How to Choose the Right Setup

• Confirm angle, tip shape, cutting depth, shank size and the final groove width required.
• Match the shank exactly to the router collet or spindle holder.
• Check the work material, including hardwood, softwood, MDF, plywood or laminated panels.
• Use a test cut to confirm profile depth, fit and surface finish before routing finished stock.

Use and Maintenance Tips

For a cleaner edge, use steady feed pressure, remove material in multiple passes when the profile is large, and clear chips before heat builds up. Keep the cutting edge clean and inspect the bit before repeat work. A dull or dirty cutter can cause burning, chatter and rough surfaces even when the router setup is correct.

Related category: V-groove router bit selection.

Helpful guides: router bit types and uses, router bit speed chart, and woodworking router bits guide.