FTRB14 2-Flute Flush Trim Router Bit, 1/2 Inch Shank, 18mm Dia x 25mm Cut, 12.7mm Bearing

The FTRB14 is a bearing-guided flush trim router bit with two flutes and a 1/2 inch shank. Its listed cutter diameter is 18 mm, the cutting length is 25 mm, and the bearing diameter is 12.7 mm.

Listed specifications

Choose this model

Choose FTRB14 when the drawing calls for the listed 18 mm cutter, 12.7 mm bearing and two-flute configuration. Match all five dimensions to the collet, template, workpiece and available machine clearance. The flute count is a configuration difference; this listing does not assign a performance claim to it.

Compare FTRB13, FTRB14 and FTRB15

The table reports the dimensions listed for this series. Select by the required cutter and bearing geometry rather than the model number alone.

Setup and test cut

• Confirm that the router or spindle accepts a 1/2 inch shank and provides the required collet engagement.
• Check the template thickness, bearing contact and cutter clearance before starting the machine.
• Keep the material overhang within a controlled test setup; do not use the bit for unsupported heavy removal.
• Make a shallow test cut in matching scrap, then inspect the dimensions, bearing travel and edge before cutting the finished part.

Before you order

Browse the flush trim router bit category for related sizes. For a compatibility check, email sales@bitsrouter.com with the router or spindle model, collet size, template thickness, material, required cut and quantity.