-
Specification:
- Material: 40Cr and original YG8C
- Shank: SDS PLUS
- Flute: double flutes S4
- Tip: Flat tip 2 Cutter
- Drill body hardness: HRC45?to HRC48
- Carbide Hardness: HRC89.5-90.5
- Diameter: 4/5/5.5/6/6.5/7/8/10/12mm
- Length: 160mm
Usage:
- Installed with the round handle interface hammer on concrete, stone, brick body carries out slotting operation, for building, installation of water and electricity, home decoration, modern DIY necessary tools.
Packing Included:
- 1pc x 4/5/5.5/6/6.5/7/8/10/12/14 X 160MM
Note:
- We have been producing drill bits, hole saws and chisels for more than 26 years till now. As to drill bits, we only adopt original carbide tip YG8C, not recycle one. And it is much strong. Besides, 40CR is much better than normal material 45# steel. For example, 6X160mm, we can drill more than 150 holes.
- Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you
?
Router Bits
Milling Tools
Angle Ruler
Drill Bits & Hole Saws
Tile Lifter
Wood Hole Saw
Wood Lathe
Woodworking
Combination Tools
Woodworking Tools