No products in the cart.
(J68) Pioneer Finger Joint Cutter – Inserted Alloy Cutter for Panel Tenoning
Price range: $11.25 through $24.17
J68 Pioneer finger joint cutter with inserted alloy teeth for panel tenoning. Compare the table by outer diameter, thickness, connection length and aperture before choosing a middle or bottom cutter configuration.
The J68 Pioneer finger joint cutter is an inserted-alloy cutter for panel tenoning and finger-joint work. The specification table below lists the available model, outer diameter, thickness, connection length, aperture and whether the cutter is a middle or bottom configuration.
How to choose the J68 configuration
- Start with the required finger-joint width and the panel or board dimensions.
- Match the connection length and aperture to the arbor, holder or spindle setup.
- Choose the middle or bottom configuration shown in the remarks column for the intended joint geometry.
- Confirm the outer diameter, thickness and machine clearance before ordering.
Specification table
| Model | Outer Diameter | Thickness | Connection Length | Aperture | Remarks |
| 4.0*160-4 | 160 | 4.0 | 12mm | 30/35/40/50/70 | middle |
| 160 | 10 | 12mm | 30/35/40/50/70 | bottom | |
| 4.0*160-4 9mm | 160 | 4.0 | 9mm | 40/50 | middle |
| 160 | 10 | 9mm | 40/50 | bottom | |
| 4.0*160-4 7mm | 160 | 4.0 | 7mm | 40/50 | middle |
| 160 | 10 | 7mm | 40/50 | bottom | |
| 4.0*160-2 | 160 | 4.0 | 12mm | 40/50/70 | middle |
| 160 | 10 | 12mm | 40/50/70 | bottom | |
| 4.0*160-2 9mm | 160 | 4.0 | 9mm | 40/50 | middle |
| 160 | 10 | 9mm | 40/50 | bottom | |
| 4.2*160-4 | 160 | 4.2 | 14mm | 30/35/40/50 | middle |
| 160 | 10 | 14mm | 30/35/40/50 | bottom | |
| 3.5*160-2 6mm | 160 | 3.5 | 6mm | 50 | middle |
| 160 | 10 | 6mm | 50 | bottom | |
| 3.5*160-4 6mm | 160 | 3.5 | 6mm | 50 | middle |
| 160 | 10 | 6mm | 50 | bottom | |
| 6.0*160-4 | 160 | 6.0 | 19mm | 35/40/50 | middle |
| 160 | 10.5 | 19mm | 35/40/50 | bottom | |
| 6.0*160-4 16mm | 160 | 6.0 | 16mm | 35/40/50 | middle |
| 160 | 10.5 | 16mm | 35/40/50 | bottom | |
| 7.0*160-4 | 160 | 7.0 | 25mm | 35/40/50 | middle |
| 160 | 12 | 25mm | 35/40/50 | bottom | |
| 7.0*160-4 16mm | 160 | 7.0 | 16mm | 40/50 | middle |
| 160 | 12 | 16mm | 40/50 | bottom | |
| 8.0*160-4 | 160 | 8.0 | 28mm | 40 | middle |
| 160 | 12 | 28mm | 40 | bottom |
Setup and test cut
Secure the workpiece and use the correct arbor, spacers and guard for the selected configuration. Test the joint on matching scrap, then check the finger width, depth, fit and alignment before machining production panels. Stop if the cutter vibrates, overheats or produces unexpected chipping.
Product references
For a compatibility check, email sales@bitsrouter.com with the machine, arbor, material, required joint dimensions and quantity.
| type | J08_22 – 3.2mm Thickness, Ø160mm, 50 Bore, 6mm Tooth Depth, Middle Cutter, 4 Teeth, J08_23 – 3.2mm Thickness, Ø160mm, 50 Bore, 6mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_24 – 4.0mm Thickness, Ø160mm, 40 Bore, 6mm Tooth Depth, Middle Cutter, 4 Teeth, J08_25 – 4.0mm Thickness, Ø160mm, 40 Bore, 6mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_26 – 4.0mm Thickness, Ø160mm, 50 Bore, 6mm Tooth Depth, Middle Cutter, 4 Teeth, J08_27 – 4.0mm Thickness, Ø160mm, 50 Bore, 6mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_28 – 4.0mm Thickness, Ø160mm, 70 Bore, 6mm Tooth Depth, Middle Cutter, 4 Teeth, J08_29 – 4.0mm Thickness, Ø160mm, 70 Bore, 6mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_30 – 4.0mm Thickness, Ø160mm, 40 Bore, 9mm Tooth Depth, Middle Cutter, 4 Teeth, J08_31 – 4.0mm Thickness, Ø160mm, 40 Bore, 9mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_32 – 4.0mm Thickness, Ø160mm, 50 Bore, 9mm Tooth Depth, Middle Cutter, 4 Teeth, J08_33 – 4.0mm Thickness, Ø160mm, 50 Bore, 9mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_34 – 4.0mm Thickness, Ø160mm, 70 Bore, 9mm Tooth Depth, Middle Cutter, 4 Teeth, J08_35 – 4.0mm Thickness, Ø160mm, 70 Bore, 9mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_36 – 4.0mm Thickness, Ø160mm, 30 Bore, 12mm Tooth Depth, Middle Cutter, 4 Teeth, J08_37 – 4.0mm Thickness, Ø160mm, 30 Bore, 12mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_38 – 4.0mm Thickness, Ø160mm, 35 Bore, 12mm Tooth Depth, Middle Cutter, 4 Teeth, J08_39 – 4.0mm Thickness, Ø160mm, 35 Bore, 12mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_40 – 4.0mm Thickness, Ø160mm, 40 Bore, 12mm Tooth Depth, Middle Cutter, 4 Teeth, J08_41 – 4.0mm Thickness, Ø160mm, 40 Bore, 12mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_42 – 4.0mm Thickness, Ø160mm, 50 Bore, 12mm Tooth Depth, Middle Cutter, 4 Teeth, J08_43 – 4.0mm Thickness, Ø160mm, 50 Bore, 12mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_44 – 4.0mm Thickness, Ø160mm, 70 Bore, 12mm Tooth Depth, Middle Cutter, 4 Teeth, J08_45 – 4.0mm Thickness, Ø160mm, 70 Bore, 12mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_46 – 4.2mm Thickness, Ø160mm, 40 Bore, 14mm Tooth Depth, Middle Cutter, 4 Teeth, J08_47 – 4.2mm Thickness, Ø160mm, 40 Bore, 14mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_48 – 4.2mm Thickness, Ø160mm, 50 Bore, 14mm Tooth Depth, Middle Cutter, 4 Teeth, J08_49 – 4.2mm Thickness, Ø160mm, 50 Bore, 14mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_50 – 4.6mm Thickness, Ø160mm, 50 Bore, 5mm Tooth Depth, Middle Cutter, 4 Teeth, J08_51 – 4.6mm Thickness, Ø160mm, 50 Bore, 5mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_52 – 6.0mm Thickness, Ø160mm, 40 Bore, 19mm Tooth Depth, Middle Cutter, 4 Teeth, J08_53 – 6.0mm Thickness, Ø160mm, 40 Bore, 19mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_54 – 6.0mm Thickness, Ø160mm, 50 Bore, 19mm Tooth Depth, Middle Cutter, 4 Teeth, J08_55 – 6.0mm Thickness, Ø160mm, 50 Bore, 19mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_56 – 7.0mm Thickness, Ø160mm, 40 Bore, 16mm Tooth Depth, Middle Cutter, 4 Teeth, J08_57 – 7.0mm Thickness, Ø160mm, 40 Bore, 16mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_58 – 7.2mm Thickness, Ø160mm, 40 Bore, 16mm Tooth Depth, Middle Cutter, 4 Teeth, J08_59 – 7.2mm Thickness, Ø160mm, 40 Bore, 16mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_60 – 7.0mm Thickness, Ø160mm, 35 Bore, 25mm Tooth Depth, Middle Cutter, 4 Teeth, J08_61 – 7.0mm Thickness, Ø160mm, 35 Bore, 25mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_62 – 7.0mm Thickness, Ø160mm, 40 Bore, 25mm Tooth Depth, Middle Cutter, 4 Teeth, J08_63 – 7.0mm Thickness, Ø160mm, 40 Bore, 25mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_64 – 7.0mm Thickness, Ø160mm, 50 Bore, 25mm Tooth Depth, Middle Cutter, 4 Teeth, J08_65 – 7.0mm Thickness, Ø160mm, 50 Bore, 25mm Tooth Depth, Bottom Cutter, 4 Teeth, J08_66 – 7.0mm Thickness, Ø160mm, 40 Bore, 25mm Tooth Depth, Middle Cutter, Reinforced, 4 Teeth, J08_67 – 7.0mm Thickness, Ø160mm, 40 Bore, 25mm Tooth Depth, Bottom Cutter, Reinforced, 4 Teeth, J08_68 – 2.9mm Thickness, Ø17mm Bore, 3mm Tooth Depth, Silver |
|---|
Related products
Joinery Router Bits
Price range: $16.67 through $27.08
Joinery Router Bits
Price range: $31.25 through $208.33