RTE687 – Fluting Router Bit, 1/2″ (12mm) Shank for Woodworking Grooves
$13.97
The Bitsrouter RTE687 Fluting Router Bit creates clean grooves and decorative edges. With a durable carbide tip and 1/2″ (12mm) shank, it’s perfect for woodworking, furniture, and panel carving.
Fluting Router Bit – 1/2″ (12mm) Shank Carbide Groove Cutter for Woodworking
Durable router bits made from 45# steel with Teflon heat-resistant coating. Ideal for clean fluting cuts on MDF, plywood, solid wood and more.
Specifications
- Name: Fluting router bits
- Item: 12 mm Shank Router Bit
- Material: 45# steel
- Features: High-temperature & heat-resistant Teflon coating
- Tolerance: ±0.003″
- Bearing: Sealed & lubricated
- Shank Diameter: 12 mm / 12.7 mm
- Applicable Materials: Solid wood, ecological board, MDF, plywood, etc.
- Applicable Equipment: Electric router, trim router, engraving/CNC, hanging machine, etc.
- Recommended Parameters: Feed 8–12 m/min; Spindle 18,000–24,000 RPM
Package Included
- 1 × router bit
Notes
- Your selected color will be prioritized for shipment; if out of stock, an alternative color may be sent.
- Due to manual measurement, a small deviation of 1–3 mm may occur.
- Display/photography differences may cause slight color variation from the actual product.
Reference
| Common Machine | Typical Speed Range | Notes |
|---|---|---|
| Trim router | 10,000–30,000 RPM | — |
| Electric router | 9,000 / 12,000 / 15,000 / 19,000 / 23,000 RPM | Multi-gear (1st–5th) |
| Vertical router (table) | 12,000 – 24,000 RPM | Low/High ranges |
| Automatic engraving / CNC | Up to 18,000 RPM (VFD) | Variable frequency |
| Diameter / Cutting Height (mm) | Max Speed (RPM) | Max Feed (mm/min) |
|---|---|---|
| ≤ 25 | 24,000 | 5,000 |
| 25.1–35 | 18,000 | 4,000 |
| 35.1–50 | 16,000 | 3,500 |
| 50.1–60 | 14,000 | 3,000 |
| 60.1–80 | 12,000 | 2,500 |
| > 80 | 10,000 | 2,000 |
| type | 1/2" shank – Fluting router bit, 12mm shank – Fluting router bit |
|---|
Related products
Milling Cutter Accessories
TX5808 – Router Extension Rod Set with ER Collet (1/4″ & 1/2″ Shank)
Milling Cutter Accessories
TX6217 – Router & Grinder Collet Adapter Sleeves (6mm / 1/4″ / 8mm)
Milling Cutter Accessories
TX7972 – M17 Router Collet Adapter Set for Woodworking Tools
Milling Cutter Accessories
TX084 – M15 Collet Adapter with Integrated Nut for Trim Routers (M15x1 Thread)
Milling Cutter Accessories
RTS032 – Router Collet Reducer Set | 6mm, 6.35mm (1/4″), 8mm
Milling Cutter Accessories
TX5130 – 1/2″ Shank Router Bit Extension Rod with ER Collets
Milling Cutter Accessories
Milling Cutter Accessories
TX5162 – 1/4″ Collet Adapter with M14 Thread for Trim Routers
