RTE9925 – Double Edge Flush Trim Router Bit (8mm Shank)
$3.23
The RTE9925 Double Edge Flush Trim Router Bit ensures smooth, precise trimming with dual cutting edges. Featuring durable carbide and an 8mm shank, it’s ideal for woodworking, laminate, and furniture edge finishing.
Double Edge Flush Trim Router Bit – 8mm Shank Carbide Trimming Tool
High-quality trimming router bit designed for flush cutting and edge profiling. Built with durable 45# steel, Teflon coating, and sealed bearings, it provides clean and accurate results on wood, MDF, and plywood panels.
Features
- Engineered for flush trimming and edge finishing on wood panels.
- High-temperature & heat-resistant Teflon coating prevents resin build-up.
- Sealed lubricated bearings ensure stability and long service life.
- ±0.003″ tolerance for precise, splinter-free trimming.
- Operates best at 18,000–24,000 RPM with feed rate 8–12 m/min.
Specifications
- Name: Trimming Router Bit
- Item: 8 mm Shank Router Bit
- Material: 45# steel
- Tolerance: ±0.003″
- Bearing: Sealed & lubricated
- Shank Diameter: 8 mm
- Applicable Materials: Solid wood, ecological board, MDF, plywood, and similar composites
- Applicable Equipment: Electric/trim router, engraving machine, trimmer, hanging machine, CNC, etc.
- Recommended Parameters: Feed 8–12 m/min; spindle 18,000–24,000 RPM
Package Includes
- 1 × router bit
Notes
- Your selected color will be prioritized. If out of stock, a close alternative may be supplied.
- Due to manual measurement, dimensions may vary by 1–3 mm.
- Due to display and lighting differences, the actual color may vary slightly from images.
Common Machine Speeds
| Machine | Typical Speed Range | Notes |
|---|---|---|
| Trim router | 10,000–30,000 RPM | Flush trimming and edge finishing |
| Electric router (geared) | 9,000 / 12,000 / 15,000 / 19,000 / 23,000 RPM | Gear selector 1–5 |
| Vertical milling / spindle moulder | ~12,000 (low) / ~24,000 (high) | Two-range speed |
| Automatic engraving (CNC) | Up to ~18,000 RPM | VFD-controlled spindle |
Diameter vs. Max Speed / Feed
| Cutter Diameter / Cutting Height (mm) | Max Speed (RPM) | Max Feed (mm/min) |
|---|---|---|
| ≤ 25 | 24,000 | 5,000 |
| 25.1–35 | 18,000 | 4,000 |
| 35.1–50 | 16,000 | 3,500 |
| 50.1–60 | 14,000 | 3,000 |
| 60.1–80 | 12,000 | 2,500 |
| > 80 | 10,000 | 2,000 |
Reference values only — adjust according to material hardness, chip load, and machine rigidity.
| type | 8mm shank – 8 x 8 x 20mm (2-pack) |
|---|
Related products
8mm Shank Router Bits
SET012 – 15-Piece Router Bit Set | 8mm Shank Woodworking Kit
12.7mm （½-Inch ）Shank Router Bits
8mm Shank Router Bits
RTE880 – Bevel (Chamfer) Router Bit Set | 8mm Shank, 11.25°–45°
8mm Shank Router Bits
RTE80 – 8mm Shank Adjustable Tongue and Groove Router Bit | Slot Cutter
12.7mm （½-Inch ）Shank Router Bits
RT690 – 4-Edge T-Slot Cutter Router Bit (8mm, 12mm & 1/2″ Shank)
8mm Shank Router Bits
RTN30 – 8mm Shank Finger Joint Router Bit | Multi-Tooth Cutter
8mm Shank Router Bits
8mm Shank Router Bits
RTE7950 – 4-Wing Carbide Insert Slotting Router Bit | 1/2″, 12mm, 8mm Shank Options
